LM7121IM5/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LM7121 |
| Pin Count | 5 |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Operating Supply Current | 5.1mA |
| Nominal Supply Current | 5.3mA |
| Output Current | 71mA |
| Slew Rate | 520V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 5.5μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~11V ±2.25V~5.5V |
| Output Current per Channel | 53mA |
| Input Offset Voltage (Vos) | 1.6mV |
| Bandwidth | 175MHz |
| Gain Bandwidth Product | 105MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 175000 kHz |
| Voltage Gain | 64dB |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 160MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Offset Current-Max (IIO) | 4.3μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM7121IM5/NOPB Overview
There is a SC-74A, SOT-753 case in which the instrumentation amplifier is packaged. An op amp of this type is a Voltage Feedback-type. A Cut Tape (CT) case is used for delivering the op amp. In recent months, the number of terminations has approached 5. It consists of a total of 5 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. It has 5 pins that make up the linear amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 1.6mV. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 5.1mA . It is a member of the 64dB's 64dB family. There are 1 channels on the operational amplifiers. The operating supply voltage of instrumentation amplifier is rated 5.5V voltage. To pack the operational amplifier ics, TR is adopted as the packing method.
LM7121IM5/NOPB Features
5 Pins
supply voltage of 5V
64dB voltage gain
LM7121IM5/NOPB Applications
There are a lot of Texas Instruments LM7121IM5/NOPB Instrumentational OP Amps applications.
- Image computer boards
- Car stereo
- Video conversion and routing
- Weak signal detection
- Portable docking station
- Signal operation
- Mobile phone
- Television
- Navigation
- Differentiator circuits
