LM7171AIM
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | VIP™ III |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LM7171 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Operating Supply Current | 6.5mA |
| Nominal Supply Current | 6.5mA |
| Output Current | 100mA |
| Slew Rate | 4100V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 2.7μA |
| Voltage - Supply, Single/Dual (±) | 5.5V~36V ±2.75V~18V |
| Output Current per Channel | 118mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 200MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 200000 kHz |
| Voltage Gain | 78dB |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | NO |
| Frequency Compensation | YES AVCL>=2 |
| Voltage - Input Offset | 200μV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 220MHz |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 4μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM7171AIM Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. There are two types of operational amplifiers in this circuit. A Tube case is used to deliver the buffer op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. Please take in mind that this instrumentation amplifier should be run at 5V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are located on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 1.5mV. The mounting type that is recommended for this electrical part is Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 6.5mA and 10 . You should keep the voltage gain at 78dB for the time being. Instrumentation amplifier has 1 channels on it. The operating supply voltage of instrumentation amplifier is rated 18V voltage. Buffer op amp series numbers are indicated by the VIP? III.
LM7171AIM Features
8 Pins
supply voltage of 5V
78dB voltage gain
LM7171AIM Applications
There are a lot of Texas Instruments LM7171AIM Instrumentational OP Amps applications.
- Television
- Switching amplifier
- Gaming industry
- Automation control systems
- E-book readers
- MP3
- Polarized electrodes
- Biopotential
- Multimedia playback equipment
- High-frequency data acquisition systems
