LM7171AIM/NOPB
| Parameters | |
|---|---|
| Unity Gain BW-Nom | 200000 kHz |
| Voltage Gain | 78dB |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | NO |
| Frequency Compensation | YES AVCL>=2 |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 220MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Input Offset Current-Max (IIO) | 4μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | VIP™ III |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LM7171 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Operating Supply Current | 6.5mA |
| Nominal Supply Current | 6.5mA |
| Output Current | 100mA |
| Max Supply Current | 8mA |
| Slew Rate | 4100V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 2.7μA |
| Voltage - Supply, Single/Dual (±) | 5.5V~36V ±2.75V~18V |
| Output Current per Channel | 118mA |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 200MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
LM7171AIM/NOPB Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. Buffer amps of this type are called Voltage Feedback-types. Upon delivery, op amp ic is packaged in a Tube case. There is a growing number of terminations approaching the number of 8. The total number of pins on linear amplifier is 8. It is important to remember that this op amp should be operated at a voltage of 5V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The buffer op amp includes 8 pins. There is an input offset voltage of 200μV for this buffer op amp. This electronic part is recommended for mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 6.5mA . There should be no change in the voltage gain at 78dB. As far as the device is concerned, buffer amplifier has 1 channels. The operating supply voltage of instrumentation amplifier is rated 18V voltage. The VIP? III indicates the series number of the op amp.
LM7171AIM/NOPB Features
8 Pins
supply voltage of 5V
78dB voltage gain
LM7171AIM/NOPB Applications
There are a lot of Texas Instruments LM7171AIM/NOPB Instrumentational OP Amps applications.
- Portable docking station
- Image computer boards
- Computer workstations
- Subtraction operation circuits
- Non-polarized electrodes
- Addition operation circuits
- RF cable systems
- Blood pressure sensors
- Car stereo
- Multimedia playback equipment
