LM7171BIM/NOPB
| Parameters | |
|---|---|
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES AVCL>=2 |
| Voltage - Input Offset | 200μV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 220MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Input Offset Current-Max (IIO) | 4μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | VIP™ III |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LM7171 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Nominal Supply Current | 6.5mA |
| Output Current | 100mA |
| Slew Rate | 4100V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 2.7μA |
| Voltage - Supply, Single/Dual (±) | 5.5V~36V ±2.75V~18V |
| Output Current per Channel | 118mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Bandwidth | 200MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 200000 kHz |
| Voltage Gain | 78dB |
LM7171BIM/NOPB Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a Voltage Feedback-type. The op amp is delivered to you in a Tube case. In recent months, the number of terminations has approached 8. Linear amplifier has a total of 8 pins. Please take in mind that op amp should be run at 5V. It should be noted that this op amp is a type of Operational Amplifier device. It has 8 pins that make up the linear amplifier. Op amp rates 3.5mV as input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . It is recommended to keep the voltage gain at 78dB at all times. This op amp ic has 1 circuits. Op amp ic has 1 channels. The operating supply voltage of the buffer op amp is rated at 18V. The VIP? III stands for the buffer op amp's serial number.
LM7171BIM/NOPB Features
8 Pins
supply voltage of 5V
78dB voltage gain
LM7171BIM/NOPB Applications
There are a lot of Texas Instruments LM7171BIM/NOPB Instrumentational OP Amps applications.
- Signal amplification
- Power transmission
- Industrial control system
- PDA
- ECG equipment
- High input resistance broadband
- Commercial audio systems
- Inverse/same-phase proportional circuit
- Instrumentation
- Information processing
