LM7171BIN
| Parameters | |
|---|---|
| Number of Channels | 1 |
| Operating Supply Current | 6.5mA |
| Nominal Supply Current | 6.5mA |
| Output Current | 100mA |
| Slew Rate | 4100V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 2.7μA |
| Voltage - Supply, Single/Dual (±) | 5.5V~36V ±2.75V~18V |
| Output Current per Channel | 118mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 200MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 125000 kHz |
| Voltage Gain | 78dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES AVCL>=2 |
| Voltage - Input Offset | 200μV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 220MHz |
| Programmable Power | NO |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | VIP™ III |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Packing Method | RAIL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | LM7171 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
LM7171BIN Overview
There is a 8-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. A Voltage Feedback-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. We are approaching the 8h termination of the year. In this case, there are 8 pins on the board. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this op amp is a type of Operational Amplifier device. The op amp ic has an array of 8 pins on it. Op amp rates 7mV as input offset voltage. This electronic part is recommended for mounting type Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . You can run this op amp ic on 6.5mA . 78dB should be the voltage gain. The op amp ic has 1 channels on it. The operating supply voltage of instrumentation amplifier is rated 18V voltage. An buffer amplifier is packed in a RAIL-shape according to the design. VIP? III is the number that corresponds to the series of the buffer op amp.
LM7171BIN Features
8 Pins
supply voltage of 5V
78dB voltage gain
LM7171BIN Applications
There are a lot of Texas Instruments LM7171BIN Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- Integrator circuits
- Television broadcasting equipment
- Switching amplifier
- Broadcasting
- High input resistance broadband
- Signal operation
- Weighing systems
- Cinema or auditorium audio system
- Power generator
