LM7301IM5/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.2V |
| Base Part Number | LM7301 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 28V |
| Number of Channels | 1 |
| Operating Supply Current | 720μA |
| Nominal Supply Current | 600μA |
| Power Dissipation | 350mW |
| Output Current | 9.5mA |
| Slew Rate | 1.25V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 103nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~32V ±0.9V~16V |
| Output Current per Channel | 11.7mA |
| Input Offset Voltage (Vos) | 40μV |
| Bandwidth | 4MHz |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 97.03dB |
| Power Supply Rejection Ratio (PSRR) | 87dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.3μA |
| Programmable Power | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM7301IM5/NOPB Overview
It is packaged in an SC-74A, SOT-753-case that protects the operational amplifiers from damage. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 5 terminations in the next few months. Buffer amplifier has a total of 5 pins on it. It would be helpful if you could remember that this op amp ic should be powered by an 2.2V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. An 5-pin op amp ic is included in the package. The input offset voltage is 40μV. For this electrical component, Surface Mount is the recommended mounting type. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. It is possible to operate this buffer amplifier from a supply current of 720μA . It is recommended to keep the voltage gain at 97.03dB at all times. Instrumentation amplifier has 1 channels on it. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The operating supply voltage of instrumentation amplifier is rated 28V voltage. It is used TR to pack the op amps.
LM7301IM5/NOPB Features
5 Pins
supply voltage of 2.2V
97.03dB voltage gain
Output Type: Rail-to-Rail
LM7301IM5/NOPB Applications
There are a lot of Texas Instruments LM7301IM5/NOPB Instrumentational OP Amps applications.
- Tablets
- Scintillation detectors
- Power control
- Thermocouples
- Weak signal detection
- Instrumentation
- Division circuits
- Mobile phone
- Video conversion and routing
- Home audio systems
