LM7301IM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.2V |
| Base Part Number | LM7301 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Nominal Supply Current | 600μA |
| Power Dissipation | 350mW |
| Output Current | 11mA |
| Current - Supply | 720μA |
| Slew Rate | 1.25V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 103nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~32V ±0.9V~16V |
| Output Current per Channel | 11.7mA |
| Input Offset Voltage (Vos) | 8mV |
| Bandwidth | 4MHz |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 97.03dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Power Supply Rejection Ratio (PSRR) | 87dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 35V |
| Voltage - Input Offset | 40μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.3μA |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.065μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM7301IM/NOPB Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. A Tube case is used to deliver the buffer op amp. The number of terminations approaches 8. It consists of a total of 8 pins in total. This linear amplifier should be powered by an 2.2V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are located on the operational amplifiers. There is an input offset voltage of 8mV for this buffer op amp. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . There should be no change in the voltage gain at 97.03dB. As far as the device is concerned, buffer amplifier has 1 channels. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. It is recommended that you use an 720μA power supply with this electrical part in order for it to operate correctly.
LM7301IM/NOPB Features
8 Pins
supply voltage of 2.2V
97.03dB voltage gain
Output Type: Rail-to-Rail
LM7301IM/NOPB Applications
There are a lot of Texas Instruments LM7301IM/NOPB Instrumentational OP Amps applications.
- PDA
- Large motor controllers
- Division circuits
- Inverse/same-phase proportional circuit
- Automatic control
- Wireless base stations
- Comparator
- Communication
- Test and measurement instruments
- Signal filtering
