LM7321MAX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LM7321 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 16V |
| Number of Elements | 1 |
| Operating Supply Current | 1.1mA |
| Nominal Supply Current | 950μA |
| Output Current | 100mA |
| Slew Rate | 18V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 1.1μA |
| Voltage - Supply, Single/Dual (±) | 2.5V~32V ±1.25V~16V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 700μV |
| Bandwidth | 20MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 20000 kHz |
| Voltage Gain | 80dB |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.2μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM7321MAX/NOPB Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Buffer amps of this type are called General Purpose-types. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. During the past two weeks, there have been close to 8 terminations. Linear amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. An 8-pin op amp ic is included in the package. With regard to input offset voltage, instrumentation amplifier is rated at 700μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . A supply current of 1.1mA can be used to operate this linear amplifier. It is recommended to keep the voltage gain at 80dB at all times. On the output type, there are Rail-to-Rail different types of op amps. There are 1 elements in this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 16V voltage. A TR-shaped amplifier is used to pack the buffer amps.
LM7321MAX/NOPB Features
8 Pins
supply voltage of 5V
80dB voltage gain
Output Type: Rail-to-Rail
LM7321MAX/NOPB Applications
There are a lot of Texas Instruments LM7321MAX/NOPB Instrumentational OP Amps applications.
- Signal transformation
- High gain DC amplifier
- Professional videography
- Broadcasting
- pH (acidity)
- Car stereo
- Tablets
- High input resistance broadband
- Portable docking station
- Computer workstations
