LM7321MF/NOPB
| Parameters | |
|---|---|
| Max Frequency | 50kHz |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.2μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LM7321 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 16V |
| Number of Channels | 1 |
| Operating Supply Current | 1.1mA |
| Nominal Supply Current | 950μA |
| Output Current | 60mA |
| Slew Rate | 18V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 1.1μA |
| Voltage - Supply, Single/Dual (±) | 2.5V~32V ±1.25V~16V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 700μV |
| Bandwidth | 20MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 20000 kHz |
| Voltage Gain | 80dB |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
LM7321MF/NOPB Overview
It is packaged in an SC-74A, SOT-753-case that protects the operational amplifiers from damage. An op amp ic of the General Purpose type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. A total of 5 terminations have been reported in the past few weeks. In total, there are 5 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 5 pins are available on the instrumentation amplifier. Op amp ic rates 700μV for input offset voltage. This electronic part is best mounted with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 1.1mA and 10 . You should keep the voltage gain at 80dB for the time being. The op amp ic has 1 channels on it. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 16V. It is used TR to pack the op amps.
LM7321MF/NOPB Features
5 Pins
supply voltage of 5V
80dB voltage gain
Output Type: Rail-to-Rail
LM7321MF/NOPB Applications
There are a lot of Texas Instruments LM7321MF/NOPB Instrumentational OP Amps applications.
- Switching amplifier
- Exponential operation circuits
- Wireless base stations
- Gaming industry
- Semiconductor detectors
- Test and measurement instruments
- Fast A/D and D/A converters
- Computer workstations
- PDA
- Voltage regulation circuit
