Parameters |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
LM7322 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
16V |
Number of Channels |
2 |
Operating Supply Current |
2.5mA |
Nominal Supply Current |
2mA |
Output Current |
100mA |
Slew Rate |
18V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
65 dB |
Current - Input Bias |
1.1μA |
Voltage - Supply, Single/Dual (±) |
2.5V~32V ±1.25V~16V |
Output Current per Channel |
100mA |
Input Offset Voltage (Vos) |
700μV |
Bandwidth |
20MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
20000 kHz |
Voltage Gain |
80dB |
Average Bias Current-Max (IIB) |
1.5μA |
Power Supply Rejection Ratio (PSRR) |
78dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
17.5V |
Low-Bias |
NO |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
1μA |
Programmable Power |
NO |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
LM7322MAX/NOPB Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the General Purpose type. Linear amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. The total number of pins on linear amplifier is 8. It is important to remember that this op amp should be operated at a voltage of 5V volts. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. It has 8 pins that make up the linear amplifier. Op amp rates 700μV as input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. Operational amplifier can operate supply current at 2.5mA. 80dB should be the voltage gain. Instrumentation amplifier has 2 channels on it. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 16V voltage. The instrumentation amplifier is packed in the form of TR.
LM7322MAX/NOPB Features
8 Pins
supply voltage of 5V
80dB voltage gain
Output Type: Rail-to-Rail
LM7322MAX/NOPB Applications
There are a lot of Texas Instruments LM7322MAX/NOPB Instrumentational OP Amps applications.
- Large motor controllers
- Communication
- Addition operation circuits
- Instrumentation
- Test equipment
- Signal operation
- Division circuits
- Portable docking station
- High speed sample
- Digital cameras