Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Packing Method |
TR |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
LM7332 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
16V |
Number of Channels |
2 |
Operating Supply Current |
2mA |
Nominal Supply Current |
2mA |
Output Current |
70mA |
Slew Rate |
15.2V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
62 dB |
Current - Input Bias |
1μA |
Voltage - Supply, Single/Dual (±) |
2.5V~32V ±1.25V~16V |
Output Current per Channel |
70mA |
Input Offset Voltage (Vos) |
2mV |
Bandwidth |
21MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
19000 kHz |
Voltage Gain |
77dB |
Power Supply Rejection Ratio (PSRR) |
78dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Low-Bias |
NO |
Micropower |
NO |
Programmable Power |
NO |
Input Offset Current-Max (IIO) |
0.3μA |
Height |
1.07mm |
Length |
3mm |
Width |
3mm |
Thickness |
970μm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LM7332MM/NOPB Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. General Purpose-type instrumentation amplifiers are used in this application. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. It is estimated that there will be at least 8 terminations this year. There are a total of 8 pins on this op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. 8 pins are located on the operational amplifiers. Regarding input offset voltage, op amp rates 2mV. The mounting type that is recommended for this electrical part is Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. A supply current of 2mA can be used to operate this linear amplifier. There should be no change in the voltage gain. Buffer op amp is equipped with 2 channels on the device. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 16V. For the packing of the instrumentation amplifier, TR is adopted.
LM7332MM/NOPB Features
8 Pins
supply voltage of 5V
77dB voltage gain
Output Type: Rail-to-Rail
LM7332MM/NOPB Applications
There are a lot of Texas Instruments LM7332MM/NOPB Instrumentational OP Amps applications.
- Instrumentation
- Portable media players
- Wireless base stations
- High-frequency data acquisition systems
- Navigation
- Computer workstations
- High/low-pass filter circuit
- Oscilloscopes
- Weak signal detection
- Medical instruments