LM7341MFE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LM7341 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 16V |
| Number of Channels | 1 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 700μA |
| Output Current | 13mA |
| Slew Rate | 1.9V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 110nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~32V ±1.25V~16V |
| Output Current per Channel | 13mA |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 4.6MHz |
| Unity Gain BW-Nom | 4600 kHz |
| Voltage Gain | 100.83dB |
| Average Bias Current-Max (IIB) | 0.07μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.08μA |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.4μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM7341MFE/NOPB Overview
It is packaged in an SC-74A, SOT-753-case that protects the operational amplifiers from damage. The instrumentation amplifier in this picture is of the General Purpose-type. Linear amplifier is delivered in a Tape & Reel (TR) case. We are approaching the 5h termination of the year. In this case, there are 5 pins on the board. Please take in mind that this instrumentation amplifier should be run at 2.7V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 5 pins are included on the operational amplifiers. There is an input offset voltage of 200μV for this buffer op amp. For this electrical component, Surface Mount is the recommended mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . This op amp can operate from a supply current at 700μA. Maintain 100.83dB as the voltage gain. There are a total of 1 channels available on the op amps. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 16V. The instrumentation amplifier is packed in the form of TR.
LM7341MFE/NOPB Features
5 Pins
supply voltage of 2.7V
100.83dB voltage gain
Output Type: Rail-to-Rail
LM7341MFE/NOPB Applications
There are a lot of Texas Instruments LM7341MFE/NOPB Instrumentational OP Amps applications.
- RF cable systems
- Inverse/same-phase proportional circuit
- Computer workstations
- Industrial applications including automation
- Instrumentation
- Mobile phone
- High/low-pass filter circuit
- Commercial audio systems
- Automatic control
- Automotive sensors
