LM7372IMA
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | VIP™ III |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LM7372 |
| Pin Count | 16 |
| Operating Supply Voltage | 18V |
| Number of Elements | 2 |
| Power Supplies | +-5/+-15V |
| Operating Supply Current | 13mA |
| Nominal Supply Current | 13mA |
| Output Current | 150mA |
| Slew Rate | 3000V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 2.7μA |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~18V |
| Output Current per Channel | 260mA |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 120MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 120000 kHz |
| Voltage Gain | 78dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 220MHz |
| Bias Current-Max (IIB) @25C | 10μA |
| Programmable Power | NO |
| Wideband | YES |
| Input Offset Current-Max (IIO) | 4μA |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM7372IMA Overview
The linear amplifier is packaged in a 16-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Voltage Feedback-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Tube case. The number of terminations approaches 16. The pins on this board total to 16 in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. It has 16 pins that make up the linear amplifier. Op amp rates 2mV as input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. In order for this instrumentation amplifier to operate, the supply current needs to be between 13mA and 10 . Voltage gain should remain at 78dB. It is possible to count 2 elements on this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 18V voltage. The VIP? III indicates the series number of the op amp.
LM7372IMA Features
16 Pins
supply voltage of 5V
78dB voltage gain
LM7372IMA Applications
There are a lot of Texas Instruments LM7372IMA Instrumentational OP Amps applications.
- Multiplication circuits
- Fission chambers
- Measurements of Wheatstone bridge
- Home audio systems
- High input resistance broadband
- Thermocouples
- Power control
- High/low-pass filter circuit
- Video data acquisition
- High-frequency data acquisition systems
