LM7705MM/NOPB
| Parameters | |
|---|---|
| Output Configuration | Negative |
| Current - Output | 26mA |
| Quiescent Current | 78μA |
| Voltage - Output (Min/Fixed) | -0.23V |
| Topology | Charge Pump |
| Logic Function | Inverting |
| Frequency - Switching | 92kHz |
| Synchronous Rectifier | No |
| Nominal Output Voltage | -232mV |
| Max Junction Temperature (Tj) | 150°C |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 139.989945mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM7705 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | -232mV |
| Output Type | Fixed |
| Voltage - Input (Min) | 3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 5mA |
LM7705MM/NOPB Overview
It is designed to provide optimal performance by utilizing the Tape & Reel (TR) package. In this voltage regulator, there are 8 terminations. There are two types of analog ICs on this voltage regulator. The first type is a ANALOG CIRCUIT-type IC. In order to save space, this voltage regulator is packaged in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. There are 1 outputs configured on this voltage regulator 12v. There are output pins on this DC DC switching regulator that generate Fixed output. This switching regulator is designed to fit the Surface Mount mounting system. As long as its operating temperature is -40°C~125°C TJ, dc to dc voltage regulator should perform well. In this voltage regulator 12v, the switching frequency is 92kHz. Despite its low input voltage, this voltage regulator can operate. The output voltage (Min/Fixed) of this voltage regulator 12v is -0.23V. This voltage regulator 12v features maximum design flexibility thanks to its 26mA output current. Its 260 peak reflow temperature makes this regulator essentially indestructible. The regulator voltage is included in the Other Analog ICs subcategory of voltage regulators. As part of the LM7705 series of regulators, the voltage regulators can be found. Voltage of voltage regulator can be delivered at -232mV volts. In order to operate voltage regulator, there are 8 pins that must be connected. Voltage regulator consumes 78μA A of quiescent current without being affected by external factors. By requiring a minimum voltage of 3VV, adjusting voltage regulator reliable performance is guaranteed. The maximum supply voltage for the voltage regulator 12v is 5.25V, so DC DC switching regulator can operate with a maximum voltage of 5.25V. The voltage regulator operates with a supply current of 5mAmps. The switching regulator can be operated with a 3.3VV power supply and is suitable for use with that voltage. I would like to point out that the voltage regulator 12v has 1 channels.
LM7705MM/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
1 channels
LM7705MM/NOPB Applications
There are a lot of Texas Instruments LM7705MM/NOPB Voltage Regulators applications.
- Product burn-in
- Scientific research
- Various precision measuring detectors
- Wind power
- Motor controller circuits
- Photovoltaic power
- Flaw detection equipment
- Network technology
- Computer-related products
- CNC system
