LM809M3-4.38/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LM809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 18μA |
| Nominal Supply Current | 18μA |
| Power Dissipation | 320mW |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Accuracy | 1.5 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.38V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.31V |
| Max Reset Threshold Voltage | 4.45V |
| Threshold Voltage | +4.38V |
| Undervoltage Threshold | 4.31V |
| Overvoltage Threshold | 4.45V |
| Height | 1.22mm |
| Length | 2.92mm |
| Width | 1.3mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM809M3-4.38/NOPB Overview
As you can see, this power management is mounted through 3 terminals. In terms of packaging, power management follows the Cut Tape (CT) model. Please refer to this PMIC for 1 functions. Power management consists of 1 channels, each of which can be used independently. Please find attached TO-236-3, SC-59, SOT-23-3 functions for your reference in this IC power. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 5V supply voltages. During operation, the power ic is supplied with a voltage of 1. The mount is provided by Surface Mount. There is a subcategory called Power Management Circuits for this power management. A total of 3 pins are located on this power management. 3 pins make up the power management. It is recommended that Vsup should not be less than 1V for this IC power. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~105°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. As far as the supply current of the power management is concerned, it is 18μA. You can always use LM809, the base supervisor number, to search for similar PMICs of the manufacturer.
LM809M3-4.38/NOPB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
18μA operating supply current
LM809M3-4.38/NOPB Applications
There are a lot of Texas Instruments LM809M3-4.38/NOPB Voltage Supervisors applications.
- Medical-specific insulation monitor
- Automotive permanent magnet synchronous motors
- Network equipment
- WiFi router
- emergency room
- Functional modules
- Telecommunications equipment
- Power distribution systems of operating room
- Urban rail transit weak current power monitoring
- Computer applications
