LM809M3-4.63
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Power Management Circuits |
| Voltage - Rated DC | 6V |
| Max Power Dissipation | 320mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LM809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 18μA |
| Nominal Supply Current | 18μA |
| Power Dissipation | 320mW |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.56V |
| Max Reset Threshold Voltage | 4.7V |
| Threshold Voltage | +4.63V |
| Undervoltage Threshold | 4.56V |
| Overvoltage Threshold | 4.7V |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM809M3-4.63 Overview
There are 3 terminals on this power management that allow it to be mounted. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 1 channels, each of which can be used independently. Please refer to power management for TO-236-3, SC-59, SOT-23-3 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. When a supply voltage of 5V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. The mount is provided by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 3 pins on the board. Pin count of the power management is 3. IC management can only work with a supply voltage of 1V volts. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountThis power management is the recommended temperature range for the supervisors: -40°C~105°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. In order to maintain a stable supply current for the power management, 18μA is the recommended value. It is always advisable to use LM809, the base supervisor number, when searching for similar PMICs from the manufacturer.
LM809M3-4.63 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
18μA operating supply current
LM809M3-4.63 Applications
There are a lot of Texas Instruments LM809M3-4.63 Voltage Supervisors applications.
- Electric heating appliances
- Smartphones
- Automotive power systems
- Display equipment
- Important electronics for automotive protection
- Detection of phase sequence
- Network equipment
- External alarm
- Medical-specific insulation monitor
- Radio
