LM809M3X-2.93/NOPB
| Parameters | |
|---|---|
| Operating Supply Current | 15μA |
| Nominal Supply Current | 15μA |
| Power Dissipation | 320mW |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.89V |
| Max Reset Threshold Voltage | 2.96V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.89V |
| Overvoltage Threshold | 2.96V |
| Height | 1.22mm |
| Length | 2.92mm |
| Width | 1.3mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LM809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
LM809M3X-2.93/NOPB Overview
This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. There is a Tape & Reel (TR)-packaging method applied to IC management. Power management is possible to find a series of 1 functions. There are 1 channels on this power managment ic that can be found in a series. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. As specified in the package specification, the peak reflow temperature of the package is set at 260. A supply voltage of 3.3V is used to conduct the PMIC chip. Power management conducts at a voltage of 1. Surface Mount is the one that mounts power management. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, the power management has 3 pins in it. Pin count of the power management is 3. IC management can only work with a supply voltage of 1V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount mounting is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~105°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. There is a supply current of 15μA for the power management. It is always advisable to use LM809, the base supervisor number, when searching for similar PMICs from the manufacturer.
LM809M3X-2.93/NOPB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current
LM809M3X-2.93/NOPB Applications
There are a lot of Texas Instruments LM809M3X-2.93/NOPB Voltage Supervisors applications.
- Smartphones
- Unattended substation automation
- FPGA design
- Radio
- Battery cars
- Detection of phase sequence
- Satellite navigation
- Medical-specific insulation monitor
- DSP
- Microcontroller system
