LM809M3X-3.08/NOPB
| Parameters | |
|---|---|
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LM809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 15μA |
| Power Dissipation | 320mW |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 3.04V |
| Max Reset Threshold Voltage | 3.11V |
| Threshold Voltage | +3.08V |
| Undervoltage Threshold | 3.04V |
| Overvoltage Threshold | 3.11V |
| Height | 1.22mm |
| Length | 2.92mm |
| Width | 1.3mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
LM809M3X-3.08/NOPB Overview
This power management consists of 3 mounting terminals on which it can be mounted. It is packaged with Tape & Reel (TR). Power management is possible to find a series of 1 functions. It is possible to find on this power management a series of 1 channels. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. Manage ics operate at 3.3V supply voltages. In a 1 supply voltage, the PMIC chip conducts. Surface Mount is the one that mounts power management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 3 pins in it. 3 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~105°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 15μA. It is always advisable to use LM809, the base supervisor number, when searching for similar PMICs from the manufacturer.
LM809M3X-3.08/NOPB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current
LM809M3X-3.08/NOPB Applications
There are a lot of Texas Instruments LM809M3X-3.08/NOPB Voltage Supervisors applications.
- Smart meter
- Utility meter
- Electronics installed in the vehicle
- Detection of phase imbalance
- Detection of phase loss
- DSP
- Microprocessor system
- Dash board
- Unattended substation automation
- DVR
