LM810M3-4.63/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LM810 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Max Output Current | 20mA |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 18μA |
| Nominal Supply Current | 18μA |
| Power Dissipation | 320mW |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 4.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.56V |
| Max Reset Threshold Voltage | 4.7V |
| Threshold Voltage | +4.63V |
| Undervoltage Threshold | 4.56V |
| Overvoltage Threshold | 4.7V |
| Height | 1.22mm |
| Length | 2.92mm |
| Width | 1.3mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM810M3-4.63/NOPB Overview
There are 3 mounting terminals on the voltage supervisor, each of which has a different function. This power ic is packaged in a way that looks like a Cut Tape (CT). The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. Please find attached TO-236-3, SC-59, SOT-23-3 functions for your reference in this IC power. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 5V-voltage supply. In a 1 supply voltage, the PMIC chip conducts. The mount is attached to Surface Mount. There is a subcategory called Power Management Circuits for this power management. Power management has a total of 3 pins. This power management system has 3 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Mounting type Surface Mount is recommended. Temperature setting for the supervisors should be -40°C~105°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. There is a 18μA supply current present in the power management. You can always use LM810, the base supervisor number, to search for similar PMICs of the manufacturer.
LM810M3-4.63/NOPB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
18μA operating supply current
LM810M3-4.63/NOPB Applications
There are a lot of Texas Instruments LM810M3-4.63/NOPB Voltage Supervisors applications.
- Data storage applications
- Smart meter
- Fire equipment power monitoring system
- Urban rail transit weak current power monitoring
- Microprocessor system
- Efficient information transmission
- Detection of phase imbalance
- Consumer electronics
- Magnetic resonance imaging
- Set top box
