LM8262MM/NOPB
| Parameters | |
|---|---|
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 11V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM8262 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 11V |
| Number of Channels | 2 |
| Nominal Supply Current | 1.15mA |
| Output Current | 53mA |
| Current - Supply | 2.5mA |
| Slew Rate | 15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 84 dB |
| Current - Input Bias | 1.05μA |
| Voltage - Supply, Single/Dual (±) | 2.5V~22V ±1.25V~11V |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 21MHz |
| Gain Bandwidth Product | 24MHz |
| Neg Supply Voltage-Nom (Vsup) | -11V |
| Unity Gain BW-Nom | 21000 kHz |
| Voltage Gain | 84dB |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 700μV |
| Current - Output / Channel | 100mA |
LM8262MM/NOPB Overview
Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. Op amps are General Purpose types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. During the past two weeks, there have been close to 8 terminations. The pins on this board total to 8 in total. As a reminder, this buffer op amp should be powered by 11V battery and that the battery should be inserted in the amplifier. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The op amp ic has an array of 8 pins on it. Op amp rates 5mV as input offset voltage. This electronic part is recommended for mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperature84dB should remain the voltage gain. The op amp ic has 2 channels on it. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of the buffer op amp is rated at 11V. For the packing of the instrumentation amplifier, TR is adopted. For optimal performance, this electrical part should be connected to a supply with a current of 2.5mA.
LM8262MM/NOPB Features
8 Pins
supply voltage of 11V
84dB voltage gain
Output Type: Rail-to-Rail
LM8262MM/NOPB Applications
There are a lot of Texas Instruments LM8262MM/NOPB Instrumentational OP Amps applications.
- E-book readers
- Portable docking station
- Voltage regulation circuit
- Scintillation detectors
- Signal filtering
- Oscilloscopes
- Weighing systems
- High speed sample
- Broadcasting
- Power control
