LM8502TME/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-WFBGA, DSBGA |
| Number of Pins | 30 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight, Camera Flash |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Frequency | 2MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LM8502 |
| Number of Outputs | 12 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.6V |
| Max Supply Voltage | 5.5V |
| Quiescent Current | 300μA |
| Topology | Step-Up (Boost) |
| Output Characteristics | CONSTANT-CURRENT |
| Output Current per Channel | 2.3A |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 2.3A Switch |
| Internal Switch(s) | Yes |
| Number of Segments | 10 |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | YES |
| Data Input Mode | SERIAL |
| Height | 675μm |
| Length | 0m |
| Width | 0m |
| Thickness | 420μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM8502TME/NOPB Overview
The 30-WFBGA, DSBGA package is used for saving board space. The LED driver's design uses 12 outputs.In this case, mounting method is Surface Mount.There is no doubt that this is a very efficient and reliable DC DC Regulator.It is capable of operating at a temperature of -30°C~85°C TA. Backlight, Camera Flash has considerable advantages.It operates based on the frequency of 2MHz.The system operates with a termination of 0.To form its configuration, there are 30 pins.Under 2.7V voltage supply, undetermined failures may occur.There are estimated to be 10 segments.It has been mounted on Surface Mount.The LED driver is available under the part number LM8502.As a maximum value, 5.5V is acceptable.Additionally, it can be classified as Display Drivers based on its characteristics.Absent external factors, there is 300μA consumption of current.
LM8502TME/NOPB Features
Available in the 30-WFBGA, DSBGA package
Operating temperature of -30°C~85°C TA
Frequency of 2MHz
Supply voltage of 3.6V
LM8502TME/NOPB Applications
There are a lot of Texas Instruments LM8502TME/NOPB LED Driver ICs applications.
- Flicker-free LED Lighting using R1580N
- Architectural lighting
- Street lighting
- High-end retail lighting
- Dimmable LED for vehicle interiors
- LED Lightings for Inspection Devices
- Linear fluorescent
- LED Lightings for Industrial Equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- A- lamps
