LMC6022IM/NOPB
| Parameters | |
|---|---|
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LMC6022 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Power Supplies | 5/15V |
| Operating Supply Current | 86μA |
| Nominal Supply Current | 86μA |
| Output Current | 40mA |
| Slew Rate | 0.11V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 63 dB |
| Current - Input Bias | 0.04pA |
| Voltage - Supply, Single/Dual (±) | 4.75V~15.5V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 11mV |
| Gain Bandwidth Product | 350kHz |
| Unity Gain BW-Nom | 350 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 4e-7μA |
| Power Supply Rejection Ratio (PSRR) | 63dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Voltage - Input Offset | 1mV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.0001μA |
LMC6022IM/NOPB Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. Op amps are General Purpose types of amplifier on the chip. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 8. It consists of a total of 8 pins in total. Please take in mind that op amp should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The buffer op amp includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 11mV. Surface Mount is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . Using a supply current of 86μA , this buffer op amp will be able to operate. There should be no change in the voltage gain. There is an operating supply voltage rating of 2 for this operational amplifier, which is rated at the manufacturer.
LMC6022IM/NOPB Features
8 Pins
supply voltage of 5V
120dB voltage gain
LMC6022IM/NOPB Applications
There are a lot of Texas Instruments LMC6022IM/NOPB Instrumentational OP Amps applications.
- Computer workstations
- Tablets
- Exponential operation circuits
- MP3
- Logarithmic operation circuits
- Image computer boards
- Integrator circuits
- Oscilloscopes
- Home audio systems
- Automatic control
