Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Operational Amplifier |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Base Part Number |
LMC6034 |
Pin Count |
14 |
Number of Channels |
4 |
Number of Circuits |
4 |
Nominal Supply Current |
1.5mA |
Output Current |
40mA |
Slew Rate |
1.1V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
63 dB |
Current - Input Bias |
0.04pA |
Voltage - Supply, Single/Dual (±) |
4.75V~15.5V ±2.38V~7.75V |
Output Current per Channel |
40mA |
Input Offset Voltage (Vos) |
9mV |
Bandwidth |
1.4MHz |
Unity Gain BW-Nom |
1400 kHz |
Voltage Gain |
126.02dB |
Power Supply Rejection Ratio (PSRR) |
63dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
16V |
Voltage - Input Offset |
1mV |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.0002μA |
Programmable Power |
NO |
Dual Supply Voltage |
5V |
Input Offset Current-Max (IIO) |
0.0001μA |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LMC6034IM/NOPB Overview
Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 14. In total, there are 14 pins on this op amp ic. Please take in mind that op amp should be run at 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. Linear amplifier includes 14 pins. The input offset voltage is 9mV. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Maintain 126.02dB as the voltage gain. On this buffer amplifier, there are 4 circuits. There are a total of 4 channels available on the op amps.
LMC6034IM/NOPB Features
14 Pins
supply voltage of 5V
126.02dB voltage gain
LMC6034IM/NOPB Applications
There are a lot of Texas Instruments LMC6034IM/NOPB Instrumentational OP Amps applications.
- Image computer boards
- Industrial control system
- Proportional counter tubes
- High input resistance broadband
- Portable docking station
- Commercial audio systems
- Exponential operation circuits
- Hand-held batteries
- High/low-pass filter circuit
- Switching amplifier