LMC6035IMM/NOPB

2 Channels 8mA per Channel 0.02pA 63 dB Instrumentational OP Amps 2V~15.5V ±1V~7.75V LMC6035 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-LMC6035IMM/NOPB
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: -
Stock: 444
Description: 2 Channels 8mA per Channel 0.02pA 63 dB Instrumentational OP Amps 2V~15.5V ±1V~7.75V LMC6035 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Cut Tape (CT)
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.7V
Terminal Pitch	0.65mm
Base Part Number	LMC6035
Pin Count	8
Output Type	Rail-to-Rail
Number of Channels	2
Operating Supply Current	650μA
Nominal Supply Current	650μA
Output Current	4mA
Slew Rate	1.5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	63 dB
Current - Input Bias	0.02pA
Voltage - Supply, Single/Dual (±)	2V~15.5V ±1V~7.75V
Output Current per Channel	8mA
Input Offset Voltage (Vos)	5mV
Bandwidth	1.4MHz
Unity Gain BW-Nom	1400 kHz
Voltage Gain	126.02dB
Power Supply Rejection Ratio (PSRR)	63dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	16V
Voltage - Input Offset	500μV
Low-Bias	YES
Micropower	YES
Programmable Power	NO
Input Offset Current-Max (IIO)	0.000045μA
Height	1.07mm
Length	3mm
Width	3mm
Thickness	970μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

LMC6035IMM/NOPB Overview

Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the General Purpose-type. Linear amplifier is delivered in a Cut Tape (CT) case. In recent months, the number of terminations has approached 8. The pins on this board total to 8 in total. The linear amplifier should be run at 2.7V at all times, so please keep that in mind when using it. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are included on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . You can run this op amp ic on 650μA . There should be no change in the voltage gain. Buffer op amp is equipped with 2 channels on the device. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. To pack the operational amplifier ics, TR is adopted as the packing method.