Parameters |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Silver/Copper (Sn/Ag/Cu) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.7V |
Terminal Pitch |
0.5mm |
Base Part Number |
LMC6035 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Number of Elements |
2 |
Operating Supply Current |
650μA |
Nominal Supply Current |
650μA |
Output Current |
4mA |
Slew Rate |
1.5V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
63 dB |
Current - Input Bias |
0.02pA |
Voltage - Supply, Single/Dual (±) |
2V~15.5V ±1V~7.75V |
Output Current per Channel |
8mA |
Input Offset Voltage (Vos) |
500μV |
Gain Bandwidth Product |
1.4MHz |
Unity Gain BW-Nom |
1400 kHz |
Voltage Gain |
126.02dB |
Power Supply Rejection Ratio (PSRR) |
63dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
16V |
Low-Bias |
YES |
Micropower |
YES |
Max Frequency |
10kHz |
Programmable Power |
NO |
Wideband |
NO |
Input Offset Current-Max (IIO) |
0.000045μA |
Height |
675μm |
Length |
2mm |
Width |
1.3mm |
Thickness |
675μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Contact Plating |
Copper, Silver, Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-WFBGA |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e1 |
Pbfree Code |
yes |
LMC6035ITL/NOPB Overview
Op amp is packaged in 8-WFBGA case. An op amp ic of the General Purpose type. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. It is estimated that there will be at least 8 terminations this year. In this case, there are 8 pins on the board. Please take in mind that this instrumentation amplifier should be run at 2.7V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. Op amp rates 500μV as input offset voltage. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. As long as the supply current of the chip does not exceed 650μA, this op amp ic can operate. Keeping the voltage gain at 126.02dB is the best course of action. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. There are 2 elements in this buffer amplifier. A TR-shaped amplifier is used to pack the buffer amps.
LMC6035ITL/NOPB Features
8 Pins
supply voltage of 2.7V
126.02dB voltage gain
Output Type: Rail-to-Rail
LMC6035ITL/NOPB Applications
There are a lot of Texas Instruments LMC6035ITL/NOPB Instrumentational OP Amps applications.
- High speed sample
- Multiplication circuits
- Thermocouples
- Non-polarized electrodes
- Oscilloscopes
- Mobile phone
- Tablets
- pH (acidity)
- Fast A/D and D/A converters
- Hand-held batteries