LMC6036IM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LMC6036 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 2.7/15V |
| Operating Supply Current | 1.3mA |
| Nominal Supply Current | 1.3mA |
| Output Current | 4mA |
| Slew Rate | 1.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 63 dB |
| Current - Input Bias | 0.02pA |
| Voltage - Supply, Single/Dual (±) | 2V~15.5V ±1V~7.75V |
| Output Current per Channel | 8mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 1.4MHz |
| Unity Gain BW-Nom | 1400 kHz |
| Voltage Gain | 126.02dB |
| Average Bias Current-Max (IIB) | 2e-7μA |
| Power Supply Rejection Ratio (PSRR) | 63dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMC6036IM/NOPB Overview
A 14-SOIC (0.154, 3.90mm Width) case is used to package the op amp. An op amp ic of the General Purpose type. Upon delivery, op amp ic is packaged in a Tube case. During the past two weeks, there have been close to 14 terminations. In total, there are 14 pins on this op amp ic. It is important to remember that this op amp should be operated at a voltage of 2.7V volts. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. In total, the buffer amplifier consists of 14 pins. The input offset voltage is 500μV. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. A supply current of 1.3mA can be used to operate this linear amplifier. Keeping the voltage gain at 126.02dB is the best course of action. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. This linear amplifier has a total of 4 elements.
LMC6036IM/NOPB Features
14 Pins
supply voltage of 2.7V
126.02dB voltage gain
Output Type: Rail-to-Rail
LMC6036IM/NOPB Applications
There are a lot of Texas Instruments LMC6036IM/NOPB Instrumentational OP Amps applications.
- Semiconductor detectors
- High input resistance broadband
- Home audio systems
- Industrial control system
- Switching amplifier
- Differentiator circuits
- High/low-pass filter circuit
- Blood pressure sensors
- Power generator
- Signal filtering
