banner_page

LMC6036IMT

8mA per Channel 0.02pA 63 dB Instrumentational OP Amps 2V~15.5V ±1V~7.75V LMC6036 14 Pins 14-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMC6036IMT
  • Package: 14-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 908
  • Description: 8mA per Channel 0.02pA 63 dB Instrumentational OP Amps 2V~15.5V ±1V~7.75V LMC6036 14 Pins 14-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory Operational Amplifier
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 2.7V
Terminal Pitch 0.65mm
Base Part Number LMC6036
Pin Count 14
Output Type Rail-to-Rail
Number of Elements 4
Power Supplies 2.7/15V
Operating Supply Current 1.3mA
Nominal Supply Current 1.3mA
Output Current 4mA
Slew Rate 1.5V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 63 dB
Current - Input Bias 0.02pA
Voltage - Supply, Single/Dual (±) 2V~15.5V ±1V~7.75V
Output Current per Channel 8mA
Input Offset Voltage (Vos) 500μV
Gain Bandwidth Product 1.4MHz
Unity Gain BW-Nom 1400 kHz
Voltage Gain 126.02dB
Power Supply Rejection Ratio (PSRR) 63dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 16V
Low-Bias YES
Micropower YES
Height Seated (Max) 1.1mm
Length 5mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-TSSOP (0.173, 4.40mm Width)
Number of Pins 14
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e0

LMC6036IMT Overview


There is a 14-TSSOP (0.173, 4.40mm Width) case package that contains the instrumentation amplifiers. A General Purpose-type buffer amplifier is shown here. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. There have been a total of 14 terminations over the past year. Buffer amplifier has a total of 14 pins. I would like to remind you that this buffer op amp should be powered by an 2.7V battery. Instrumentation amplifier is a part of Operational Amplifier. It has 14 pins that make up the linear amplifier. Op amp ic rates 500μV for input offset voltage. This electrical part should be mounted using type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Using an 1.3mA supply current, this operational amplifier ics can be operated. Maintain 126.02dB as the voltage gain. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. There is an operating supply voltage rating of 4 for this operational amplifier, which is rated at the manufacturer.

LMC6036IMT Features


14 Pins
supply voltage of 2.7V
126.02dB voltage gain
Output Type: Rail-to-Rail

LMC6036IMT Applications


There are a lot of Texas Instruments LMC6036IMT Instrumentational OP Amps applications.

  • Video data acquisition
  • Voltage regulation circuit
  • Measurements of Wheatstone bridge
  • Image computer boards
  • Mobile phone
  • Proportional counter tubes
  • Information processing
  • Laptop
  • Inverse/same-phase proportional circuit
  • Ultrasound transducers

Write a review

Note: HTML is not translated!
    Bad           Good