banner_page

LMC6042IM

2 Channels 40mA per Channel 0.002pA 62 dB Instrumentational OP Amps 0.000004μA 4.5V~15.5V ±2.25V~7.75V LMC6042 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMC6042IM
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 129
  • Description: 2 Channels 40mA per Channel 0.002pA 62 dB Instrumentational OP Amps 0.000004μA 4.5V~15.5V ±2.25V~7.75V LMC6042 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Voltage Gain 120dB
Average Bias Current-Max (IIB) 0.000004μA
Power Supply Rejection Ratio (PSRR) 62dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 16V
Voltage - Input Offset 1mV
Low-Bias YES
Micropower YES
Height 1.45mm
Length 4.9mm
Width 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e0
Part Status Not For New Designs
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory Operational Amplifier
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 235
Number of Functions 2
Supply Voltage 5V
Base Part Number LMC6042
Pin Count 8
Output Type Rail-to-Rail
Power Supplies 5/15V
Number of Channels 2
Operating Supply Current 26μA
Nominal Supply Current 26μA
Output Current 40mA
Max Supply Current 45μA
Slew Rate 0.02V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 62 dB
Current - Input Bias 0.002pA
Voltage - Supply, Single/Dual (±) 4.5V~15.5V ±2.25V~7.75V
Output Current per Channel 40mA
Input Offset Voltage (Vos) 6mV
Bandwidth 100 kHz
Unity Gain BW-Nom 100 kHz

LMC6042IM Overview


A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. There are two types of operational amplifiers in this circuit. Upon delivery, op amp ic is packaged in a Tube case. It is estimated that there will be at least 8 terminations this year. Linear amplifier has a total of 8 pins. Please take in mind that op amp should be run at 5V. It should be noted that this op amp is a type of Operational Amplifier device. There are 8 pins on this chip. The input offset voltage is 6mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, this op amp functions well at -40°C~85°C. You can run this op amp ic on 26μA . 120dB should be the voltage gain. On the buffer amps, there are 2 channels that can be used. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer.

LMC6042IM Features


8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail

LMC6042IM Applications


There are a lot of Texas Instruments LMC6042IM Instrumentational OP Amps applications.

  • Portable electronic products powered by batteries
  • pH (acidity)
  • Test equipment
  • Semiconductor detectors
  • Instrumentation
  • Differentiator circuits
  • Image computer boards
  • High gain DC amplifier
  • Band-pass filter
  • High/low-pass filter circuit

Write a review

Note: HTML is not translated!
    Bad           Good