LMC6044AIMX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LMC6044 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Power Supplies | 5/15V |
| Number of Circuits | 4 |
| Operating Supply Current | 52μA |
| Nominal Supply Current | 52μA |
| Output Current | 40mA |
| Slew Rate | 0.02V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 66 dB |
| Current - Input Bias | 0.002pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~15.5V ±2.25V~7.75V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 100kHz |
| Unity Gain BW-Nom | 100 kHz |
| Voltage Gain | 120dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Low-Bias | YES |
| Micropower | YES |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMC6044AIMX Overview
Op amp is packaged in 14-SOIC (0.154, 3.90mm Width) case. Op amps are General Purpose types of amplifier on the chip. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. We are approaching the 14h termination of the year. In total, there are 14 pins on this op amp ic. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. It should be noted that this op amp is a type of Operational Amplifier device. A total of 14 pins are present on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 1mV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . A supply current of 52μA can be used to operate this linear amplifier. It is recommended to keep the voltage gain at 120dB at all times. In total, there are 4 circuits on this buffer amplifier. On the output type, there are Rail-to-Rail different types of op amps. This linear amplifier pack is based on the TAPE AND REEL axis.
LMC6044AIMX Features
14 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
LMC6044AIMX Applications
There are a lot of Texas Instruments LMC6044AIMX Instrumentational OP Amps applications.
- Strain gauges
- Communication device
- Displayers for aircraft and air transportation control systems
- Hand-held batteries
- Signal transformation
- ECG equipment
- Measurements of Wheatstone bridge
- Portable docking station
- Signal filtering
- MP3
