banner_page

LMC6061AIM/NOPB

1 Channels 26mA per Channel 0.01pA 75 dB Instrumentational OP Amps 4.5V~15.5V ±2.25V~7.75V LMC6061 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMC6061AIM/NOPB
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 705
  • Description: 1 Channels 26mA per Channel 0.01pA 75 dB Instrumentational OP Amps 4.5V~15.5V ±2.25V~7.75V LMC6061 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Subcategory Operational Amplifier
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number LMC6061
Pin Count 8
Output Type Rail-to-Rail
Number of Channels 1
Operating Supply Current 24μA
Nominal Supply Current 24μA
Output Current 26mA
Slew Rate 0.035V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 75 dB
Current - Input Bias 0.01pA
Voltage - Supply, Single/Dual (±) 4.5V~15.5V ±2.25V~7.75V
Output Current per Channel 26mA
Input Offset Voltage (Vos) 100μV
Bandwidth 100 kHz
Unity Gain BW-Nom 100 kHz
Voltage Gain 132.04dB
Power Supply Rejection Ratio (PSRR) 75dB
Low-Offset YES
Frequency Compensation YES
Low-Bias YES
Micropower YES
Bias Current-Max (IIB) @25C 0.000004μA
Programmable Power NO
Input Offset Current-Max (IIO) 0.000002μA
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LMC6061AIM/NOPB Overview


In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. An op amp ic of the General Purpose type. Instrumentation amplifier is delivered in a Tube case. It is estimated that there will be 8 terminations in the next few months. It consists of a total of 8 pins in total. Please take in mind that op amp should be run at 5V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The buffer op amp includes 8 pins. There is an input offset voltage of 100μV for this buffer op amp. For this electrical component, Surface Mount is the recommended mounting type. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureThe buffer amplifier is capable of operating from a supply current of 24μA . You should keep the voltage gain at 132.04dB for the time being. Instrumentation amplifier has 1 channels on it. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals.

LMC6061AIM/NOPB Features


8 Pins
supply voltage of 5V
132.04dB voltage gain
Output Type: Rail-to-Rail

LMC6061AIM/NOPB Applications


There are a lot of Texas Instruments LMC6061AIM/NOPB Instrumentational OP Amps applications.

  • Band-pass filter
  • Radar
  • Video amplifiers
  • Voltage regulation circuit
  • Fission chambers
  • Signal filtering
  • Gaming industry
  • Digital cameras
  • Portable media players
  • Hand-held batteries

Write a review

Note: HTML is not translated!
    Bad           Good