LMC6061IMX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMC6061 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 24μA |
| Nominal Supply Current | 24μA |
| Output Current | 26mA |
| Slew Rate | 0.035V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 66 dB |
| Current - Input Bias | 0.01pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~15.5V ±2.25V~7.75V |
| Output Current per Channel | 26mA |
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 100kHz |
| Unity Gain BW-Nom | 100 kHz |
| Voltage Gain | 132.04dB |
| Power Supply Rejection Ratio (PSRR) | 66dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000004μA |
| Programmable Power | NO |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.000002μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMC6061IMX/NOPB Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. It should be noted that this op amp is a type of Operational Amplifier device. Linear amplifier includes 8 pins. Op amp rates 100μV as input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . A supply current of 24μA can be used to operate this linear amplifier. The voltage gain should stay at 132.04dB. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The linear amplifier consists of 1 different elements in total. For packing the buffer amplifier, the TR-axis is adopted.
LMC6061IMX/NOPB Features
8 Pins
supply voltage of 5V
132.04dB voltage gain
Output Type: Rail-to-Rail
LMC6061IMX/NOPB Applications
There are a lot of Texas Instruments LMC6061IMX/NOPB Instrumentational OP Amps applications.
- Broadcasting
- Band-pass filter
- Multimedia playback equipment
- High gain DC amplifier
- Wireless base stations
- Mobile phone
- Signal amplification
- Fission chambers
- Weighing systems
- Comparator
