LMC6064AIM/NOPB
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LMC6064 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Operating Supply Current | 80μA |
| Nominal Supply Current | 80μA |
| Output Current | 26mA |
| Slew Rate | 0.35V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 0.01pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~15.5V ±2.25V~7.75V |
| Output Current per Channel | 26mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 100 kHz |
| Unity Gain BW-Nom | 100 kHz |
| Voltage Gain | 132.04dB |
| Average Bias Current-Max (IIB) | 1e-7μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.000002μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
LMC6064AIM/NOPB Overview
In order to protect the op amps, a 14-SOIC (0.154, 3.90mm Width) case is used. This is a General Purpose type op amp. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 14. The pins on this board total to 14 in total. This linear amplifier should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. There are 14 pins on this chip. Regarding input offset voltage, buffer amplifier rates 100μV voltage. The mounting type that is recommended for this electrical part is Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. A supply current of 80μA can be used to operate this linear amplifier. Voltage gain should remain at 132.04dB. Buffer op amp is equipped with 4 channels on the device. On the output type, there are Rail-to-Rail different types of op amps.
LMC6064AIM/NOPB Features
14 Pins
supply voltage of 5V
132.04dB voltage gain
Output Type: Rail-to-Rail
LMC6064AIM/NOPB Applications
There are a lot of Texas Instruments LMC6064AIM/NOPB Instrumentational OP Amps applications.
- Medical imaging
- Biopotential
- single/dual op amp sum and difference circuits
- Weak signal detection
- Television
- High speed sample
- Automation control systems
- High/low-pass filter circuit
- Proportional counter tubes
- Scintillation detectors
