LMC6064IM
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LMC6064 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Operating Supply Current | 80μA |
| Nominal Supply Current | 80μA |
| Output Current | 26mA |
| Slew Rate | 0.35V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 66 dB |
| Current - Input Bias | 0.01pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~15.5V ±2.25V~7.75V |
| Output Current per Channel | 26mA |
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 100kHz |
| Unity Gain BW-Nom | 100 kHz |
| Voltage Gain | 132.04dB |
| Power Supply Rejection Ratio (PSRR) | 66dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Low-Bias | YES |
| Micropower | YES |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMC6064IM Overview
Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. Buffer amps of this type are called General Purpose-types. A Tube case is used to deliver the buffer op amp. There have been a total of 14 terminations over the past year. A total of 14 pins are located on this board. Please take in mind that this instrumentation amplifier should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The op amp ic has an array of 14 pins on it. There is an input offset voltage of 100μV for this buffer op amp. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . You can run this op amp ic on 80μA . It is recommended to keep the voltage gain at 132.04dB at all times. On the output type, there are Rail-to-Rail different types of op amps. The linear amplifier consists of 4 different elements in total.
LMC6064IM Features
14 Pins
supply voltage of 5V
132.04dB voltage gain
Output Type: Rail-to-Rail
LMC6064IM Applications
There are a lot of Texas Instruments LMC6064IM Instrumentational OP Amps applications.
- Proportional counter tubes
- Proportional operation circuits
- Gaming industry
- Large motor controllers
- Weighing systems
- Ultrasound transducers
- Multiplication circuits
- single/dual op amp sum and difference circuits
- pH (acidity)
- Strain gauges
