LMC6064IM/NOPB

4 Channels 26mA per Channel 0.01pA 66 dB Instrumentational OP Amps 1e-7μA 4.5V~15.5V ±2.25V~7.75V LMC6064 14 Pins 14-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-LMC6064IM/NOPB
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 714
Description: 4 Channels 26mA per Channel 0.01pA 66 dB Instrumentational OP Amps 1e-7μA 4.5V~15.5V ±2.25V~7.75V LMC6064 14 Pins 14-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Programmable Power	NO
Input Offset Current-Max (IIO)	0.000002μA
Height	1.75mm
Length	8.65mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Number of Pins	14
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
Base Part Number	LMC6064
Pin Count	14
Output Type	Rail-to-Rail
Power Supplies	5V
Number of Channels	4
Operating Supply Current	80μA
Nominal Supply Current	80μA
Output Current	26mA
Slew Rate	0.35V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	66 dB
Current - Input Bias	0.01pA
Voltage - Supply, Single/Dual (±)	4.5V~15.5V ±2.25V~7.75V
Output Current per Channel	26mA
Input Offset Voltage (Vos)	100μV
Bandwidth	100 kHz
Unity Gain BW-Nom	100 kHz
Voltage Gain	132.04dB
Average Bias Current-Max (IIB)	1e-7μA
Power Supply Rejection Ratio (PSRR)	66dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	16V
Low-Bias	YES
Micropower	YES

LMC6064IM/NOPB Overview

Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. General Purpose-type instrumentation amplifiers are used in this application. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 14. The pins on this board total to 14 in total. Please take in mind that op amp should be run at 5V. It should be noted that this op amp is a type of Operational Amplifier device. The buffer op amp includes 14 pins. As far as the input offset voltage is concerned, linear amplifier rates at 100μV. This electronic part is best mounted with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Using an 80μA supply current, this operational amplifier ics can be operated. Maintain 132.04dB as the voltage gain. Instrumentation amplifier has 4 channels on it. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits.