LMC6081IN

34mA per Channel 0.01pA 66 dB Instrumentational OP Amps 0.000004μA 4.5V~15.5V ±2.25V~7.75V LMC6081 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-LMC6081IN
Package: 8-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 112
Description: 34mA per Channel 0.01pA 66 dB Instrumentational OP Amps 0.000004μA 4.5V~15.5V ±2.25V~7.75V LMC6081 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn/Pb)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Base Part Number	LMC6081
Pin Count	8
Output Type	Rail-to-Rail
Number of Elements	1
Operating Supply Current	550μA
Nominal Supply Current	550nA
Output Current	34mA
Slew Rate	1.5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	66 dB
Current - Input Bias	0.01pA
Voltage - Supply, Single/Dual (±)	4.5V~15.5V ±2.25V~7.75V
Output Current per Channel	34mA
Input Offset Voltage (Vos)	150μV
Gain Bandwidth Product	1.3MHz
Unity Gain BW-Nom	1300 kHz
Voltage Gain	122.92dB
Average Bias Current-Max (IIB)	0.000004μA
Power Supply Rejection Ratio (PSRR)	66dB
Low-Offset	NO
Frequency Compensation	YES
Low-Bias	YES
Micropower	YES
Programmable Power	NO
Wideband	NO
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

LMC6081IN Overview

Packaged in a 8-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. General Purpose-type instrumentation amplifiers are used in this application. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are included on the operational amplifiers. Op amp rates 150μV as input offset voltage. It is recommended that this electronic component be mounted using the Through Hole mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 550μA . Keeping the voltage gain at 122.92dB is the best course of action. On the output type, there are Rail-to-Rail different types of op amps. The total number of elements in this buffer amplifier is 1.