LMC6082AIN/NOPB

2 Channels 34mA per Channel 0.01pA 75 dB Instrumentational OP Amps 1e-7μA 4.5V~15.5V ±2.25V~7.75V LMC6082 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-LMC6082AIN/NOPB
Package: 8-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 125
Description: 2 Channels 34mA per Channel 0.01pA 75 dB Instrumentational OP Amps 1e-7μA 4.5V~15.5V ±2.25V~7.75V LMC6082 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Weight	4.535924g
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Number of Functions	2
Supply Voltage	5V
Base Part Number	LMC6082
Pin Count	8
Output Type	Rail-to-Rail
Power Supplies	5/15V
Number of Channels	2
Operating Supply Current	1.1mA
Nominal Supply Current	1.1mA
Output Current	34mA
Slew Rate	1.5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	75 dB
Current - Input Bias	0.01pA
Voltage - Supply, Single/Dual (±)	4.5V~15.5V ±2.25V~7.75V
Output Current per Channel	34mA
Input Offset Voltage (Vos)	150μV
Bandwidth	1.3MHz
Unity Gain BW-Nom	1300 kHz
Voltage Gain	122.92dB
Average Bias Current-Max (IIB)	1e-7μA
Power Supply Rejection Ratio (PSRR)	75dB
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	16V
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.000004μA
Programmable Power	NO
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8

LMC6082AIN/NOPB Overview

In the package, you will find a 8-DIP (0.300, 7.62mm)-case to contain the op amp ic. Op amps are General Purpose types of amplifier on the chip. The op amp is delivered to you in a Tube case. The number of terminations is approaching the 8 mark. A total of 8 pins are attached to buffer op amp. This linear amplifier should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The op amp ic has an array of 8 pins on it. Op amp ic rates 150μV for input offset voltage. Through Hole is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges -40°C~85°C. Using an 1.1mA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 122.92dB at all times. On the buffer amps, there are 2 channels that can be used. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals.