LMC6082IN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LMC6082 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Power Supplies | 5/15V |
| Number of Circuits | 2 |
| Operating Supply Current | 1.1mA |
| Nominal Supply Current | 1.1mA |
| Output Current | 34mA |
| Slew Rate | 1.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 63 dB |
| Current - Input Bias | 0.01pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~15.5V ±2.25V~7.75V |
| Output Current per Channel | 34mA |
| Input Offset Voltage (Vos) | 150μV |
| Gain Bandwidth Product | 1.3MHz |
| Unity Gain BW-Nom | 1300 kHz |
| Voltage Gain | 122.92dB |
| Average Bias Current-Max (IIB) | 0.000004μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Power | NO |
| Length | 9.59mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMC6082IN Overview
A 8-DIP (0.300, 7.62mm) case is used to package the op amp. An op amp of this type is a General Purpose-type. Instrumentation amplifier is delivered in a Tube case. The number of terminations approaches 8. Linear amplifier has a total of 8 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this op amp is a type of Operational Amplifier device. There are 8 pins on this chip. There is an input offset voltage of 150μV for this buffer op amp. This electronic component is recommended to be mounted using the mounting type Through Hole. With regard to operating temperature, op amp ranges -40°C~85°C. An 1.1mA volt supply current is needed for this linear amplifier to operate. The voltage gain should stay at 122.92dB. On this instrumentation amplifier, there are 2 circuits that are connected together. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals.
LMC6082IN Features
8 Pins
supply voltage of 5V
122.92dB voltage gain
Output Type: Rail-to-Rail
LMC6082IN Applications
There are a lot of Texas Instruments LMC6082IN Instrumentational OP Amps applications.
- Computer workstations
- Thermocouples
- Displayers for aircraft and air transportation control systems
- Information processing
- Exponential operation circuits
- Image computer boards
- Addition operation circuits
- Precision measurement
- Oscilloscopes
- Automatic control
