LMC6082IN/NOPB
| Parameters | |
|---|---|
| Voltage Gain | 122.92dB |
| Average Bias Current-Max (IIB) | 1e-7μA |
| Power Supply Rejection Ratio (PSRR) | 66dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Voltage - Input Offset | 150μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.000004μA |
| Programmable Power | NO |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LMC6082 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 5/15V |
| Number of Circuits | 2 |
| Nominal Supply Current | 1.1mA |
| Output Current | 34mA |
| Max Supply Current | 1.5mA |
| Slew Rate | 1.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 66 dB |
| Current - Input Bias | 0.01pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~15.5V ±2.25V~7.75V |
| Input Offset Voltage (Vos) | 800μV |
| Bandwidth | 1.3MHz |
| Unity Gain BW-Nom | 1300 kHz |
LMC6082IN/NOPB Overview
In order to protect the op amps, a 8-DIP (0.300, 7.62mm) case is used. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. It is estimated that there will be at least 8 terminations this year. In this case, there are 8 pins on the board. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are included on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 800μV. This electrical part should be mounted using type Through Hole. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . Voltage gain should remain at 122.92dB. There are 2 circuits on op amps. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. There are 2 elements in this buffer amplifier.
LMC6082IN/NOPB Features
8 Pins
supply voltage of 5V
122.92dB voltage gain
Output Type: Rail-to-Rail
LMC6082IN/NOPB Applications
There are a lot of Texas Instruments LMC6082IN/NOPB Instrumentational OP Amps applications.
- Addition operation circuits
- Biopotential
- Signal amplification
- Signal transformation
- Division circuits
- E-book readers
- Exponential operation circuits
- Professional videography
- Power control
- Wireless base stations
