LMC6084AIM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LMC6084 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Operating Supply Current | 2.2mA |
| Nominal Supply Current | 2.2mA |
| Output Current | 34mA |
| Slew Rate | 1.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 0.01pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~15.5V ±2.25V~7.75V |
| Output Current per Channel | 34mA |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 1.3MHz |
| Unity Gain BW-Nom | 1300 kHz |
| Voltage Gain | 122.92dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Low-Bias | YES |
| Micropower | NO |
| Max Frequency | 10kHz |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.000002μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMC6084AIM/NOPB Overview
There is a 14-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. This is a General Purpose type op amp. Linear amplifier is delivered in a Tube case. The number of terminations approaches 14. In this case, there are 14 pins on the board. This linear amplifier should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 14 pins are included on the operational amplifiers. There is an input offset voltage of 150μV for this buffer op amp. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, op amp ranges -40°C~85°C. A supply current of 2.2mA can be used to operate this linear amplifier. You should keep the voltage gain at 122.92dB for the time being. There are 4 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages.
LMC6084AIM/NOPB Features
14 Pins
supply voltage of 5V
122.92dB voltage gain
Output Type: Rail-to-Rail
LMC6084AIM/NOPB Applications
There are a lot of Texas Instruments LMC6084AIM/NOPB Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Professional videography
- Communication
- Wireless base stations
- Weak signal detection
- PDA
- Automation control systems
- Addition operation circuits
- Computer workstations
- Blood pressure sensors
