LMC6442IM

2.1mA per Channel 0.005pA 70 dB Instrumentational OP Amps 0.000004μA 1.8V~11V ±0.9V~5.5V LMC6442 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-LMC6442IM
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 617
Description: 2.1mA per Channel 0.005pA 70 dB Instrumentational OP Amps 0.000004μA 1.8V~11V ±0.9V~5.5V LMC6442 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn/Pb)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	235
Number of Functions	2
Supply Voltage	2.2V
Base Part Number	LMC6442
Pin Count	8
Output Type	Rail-to-Rail
Number of Elements	2
Operating Supply Current	1.9μA
Nominal Supply Current	2.1μA
Output Current	2.1mA
Max Supply Current	2.6μA
Slew Rate	0.0041V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	0.005pA
Voltage - Supply, Single/Dual (±)	1.8V~11V ±0.9V~5.5V
Output Current per Channel	2.1mA
Input Offset Voltage (Vos)	1.5mV
Gain Bandwidth Product	10.5kHz
Unity Gain BW-Nom	9.5 kHz
Voltage Gain	100dB
Average Bias Current-Max (IIB)	0.000004μA
Power Supply Rejection Ratio (PSRR)	75dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	16V
Low-Bias	YES
Micropower	YES
Height	1.45mm
Length	4.9mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

LMC6442IM Overview

In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. This is a General Purpose type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. A total of 8 terminations have been reported in the past few weeks. There are a total of 8 pins on this op amp. Please take in mind that op amp should be run at 2.2V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. There are 8 pins on this chip. In terms of input offset voltage, operational amplifier rates 1.5mV. This electronic part is recommended for mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . An 1.9μA volt supply current is needed for this linear amplifier to operate. 100dB should remain the voltage gain. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply.