LMC6462AIMX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 hours ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LMC6462 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 3/15V |
| Operating Supply Current | 50μA |
| Nominal Supply Current | 50μA |
| Output Current | 75mA |
| Slew Rate | 0.028V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 0.15pA |
| Voltage - Supply, Single/Dual (±) | 3V~15.5V ±1.5V~7.75V |
| Output Current per Channel | 27mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 50 kHz |
| Unity Gain BW-Nom | 50 kHz |
| Voltage Gain | 129.54dB |
| Average Bias Current-Max (IIB) | 0.00001μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.000005μA |
| Max Junction Temperature (Tj) | 85°C |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMC6462AIMX/NOPB Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the General Purpose-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. There are a total of 8 pins on this op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are included on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 250μV. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 50μA and 10 . 129.54dB should be the voltage gain. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. Op amp has total of 2 elements. To pack the operational amplifier ics, TR is adopted as the packing method.
LMC6462AIMX/NOPB Features
8 Pins
supply voltage of 5V
129.54dB voltage gain
Output Type: Rail-to-Rail
LMC6462AIMX/NOPB Applications
There are a lot of Texas Instruments LMC6462AIMX/NOPB Instrumentational OP Amps applications.
- Ultrasound transducers
- Television
- Information processing
- Multiplication circuits
- RF cable systems
- Test equipment
- Portable electronic products powered by batteries
- Instrumentation
- Weighing systems
- Power transmission
