LMC6462BIM/NOPB

2 Channels 75mA per Channel 0.15pA 65 dB Instrumentational OP Amps 0.00001μA 3V~15.5V ±1.5V~7.75V LMC6462 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-LMC6462BIM/NOPB
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 154
Description: 2 Channels 75mA per Channel 0.15pA 65 dB Instrumentational OP Amps 0.00001μA 3V~15.5V ±1.5V~7.75V LMC6462 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Base Part Number	LMC6462
Pin Count	8
Output Type	Rail-to-Rail
Power Supplies	3/15V
Number of Channels	2
Operating Supply Current	50μA
Nominal Supply Current	90μA
Output Current	75mA
Slew Rate	0.028V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	65 dB
Current - Input Bias	0.15pA
Voltage - Supply, Single/Dual (±)	3V~15.5V ±1.5V~7.75V
Output Current per Channel	75mA
Input Offset Voltage (Vos)	250μV
Bandwidth	50 kHz
Unity Gain BW-Nom	50 kHz
Voltage Gain	129.54dB
Average Bias Current-Max (IIB)	0.00001μA
Power Supply Rejection Ratio (PSRR)	65dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	16V
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.00001μA
Programmable Power	NO
Input Offset Current-Max (IIO)	0.000005μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

LMC6462BIM/NOPB Overview

Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. Buffer amps of this type are called General Purpose-types. A Tube case is used for delivering the op amp. We are approaching the 8h termination of the year. Linear amplifier has a total of 8 pins. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are available on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 250μV voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . You can run this op amp ic on 50μA . You should keep the voltage gain at 129.54dB for the time being. There are 2 channels on the operational amplifiers. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer.