LMC6464BIM/NOPB

4 Channels 75mA per Channel 0.15pA 65 dB Instrumentational OP Amps 0.00001μA 3V~15.5V ±1.5V~7.75V LMC6464 14 Pins 14-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-LMC6464BIM/NOPB
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 622
Description: 4 Channels 75mA per Channel 0.15pA 65 dB Instrumentational OP Amps 0.00001μA 3V~15.5V ±1.5V~7.75V LMC6464 14 Pins 14-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
Base Part Number	LMC6464
Pin Count	14
Output Type	Rail-to-Rail
Power Supplies	3/15V
Number of Channels	4
Number of Circuits	4
Nominal Supply Current	90μA
Output Current	75mA
Max Supply Current	110μA
Slew Rate	0.028V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	65 dB
Current - Input Bias	0.15pA
Voltage - Supply, Single/Dual (±)	3V~15.5V ±1.5V~7.75V
Output Current per Channel	75mA
Input Offset Voltage (Vos)	3mV
Bandwidth	50 kHz
Unity Gain BW-Nom	50 kHz
Voltage Gain	129.54dB
Average Bias Current-Max (IIB)	0.00001μA
Power Supply Rejection Ratio (PSRR)	65dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	16V
Voltage - Input Offset	250μV
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.00001μA
Programmable Power	NO
Input Offset Current-Max (IIO)	0.000005μA
Height	1.75mm
Length	8.65mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 14 hours ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Number of Pins	14
Operating Temperature	-40°C~85°C

LMC6464BIM/NOPB Overview

The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. There are two types of operational amplifiers in this circuit. Linear amplifier is delivered in a Tube case. The number of terminations approaches 14. The pins on this board total to 14 in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. It has 14 pins that make up the linear amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 3mV. Surface Mount is the recommended mounting type for this linear amplifier. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. There should be no change in the voltage gain at 129.54dB. In total, there are 4 circuits on this buffer amplifier. 4 channels are available on the instrumentation amplifier. On the output type, there are Rail-to-Rail different types of op amps.