LMC6464BIN

4 Channels 75mA per Channel 0.15pA 65 dB Instrumentational OP Amps 0.00001μA 3V~15.5V ±1.5V~7.75V LMC6464 14 Pins 14-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-LMC6464BIN
Package: 14-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 678
Description: 4 Channels 75mA per Channel 0.15pA 65 dB Instrumentational OP Amps 0.00001μA 3V~15.5V ±1.5V~7.75V LMC6464 14 Pins 14-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	14-DIP (0.300, 7.62mm)
Number of Pins	14
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn/Pb)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Number of Functions	4
Supply Voltage	5V
Base Part Number	LMC6464
Pin Count	14
Output Type	Rail-to-Rail
Power Supplies	3/15V
Number of Channels	4
Operating Supply Current	90μA
Nominal Supply Current	90μA
Output Current	75mA
Max Supply Current	20μA
Slew Rate	0.028V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	65 dB
Current - Input Bias	0.15pA
Voltage - Supply, Single/Dual (±)	3V~15.5V ±1.5V~7.75V
Output Current per Channel	75mA
Input Offset Voltage (Vos)	3mV
Bandwidth	50 kHz
Unity Gain BW-Nom	50 kHz
Voltage Gain	129.54dB
Average Bias Current-Max (IIB)	0.00001μA
Power Supply Rejection Ratio (PSRR)	65dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	16V
Voltage - Input Offset	250μV
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.00001μA
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

LMC6464BIN Overview

A 14-DIP (0.300, 7.62mm) case is used to package the op amp. An op amp ic of the General Purpose type. Upon delivery, op amp ic is packaged in a Tube case. A total of 14 terminations have been reported in the past few weeks. It consists of a total of 14 pins in total. Please take in mind that op amp should be run at 5V. It should be noted that this op amp is a type of Operational Amplifier device. An 14-pin op amp ic is included in the package. Op amp ic rates 3mV for input offset voltage. This electronic part is recommended for mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. An 90μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain at 129.54dB. As far as the device is concerned, buffer amplifier has 4 channels. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals.