LMC6464BIN/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 16 hours ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LMC6464 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/15V |
| Number of Channels | 4 |
| Operating Supply Current | 90μA |
| Nominal Supply Current | 90μA |
| Output Current | 75mA |
| Slew Rate | 0.028V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.15pA |
| Voltage - Supply, Single/Dual (±) | 3V~15.5V ±1.5V~7.75V |
| Output Current per Channel | 75mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 50 kHz |
| Unity Gain BW-Nom | 50 kHz |
| Voltage Gain | 129.54dB |
| Average Bias Current-Max (IIB) | 0.00001μA |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.000005μA |
| Height | 5.33mm |
| Length | 19.177mm |
| Width | 6.35mm |
| Thickness | 3.429mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMC6464BIN/NOPB Overview
In the package, you will find a 14-DIP (0.300, 7.62mm)-case to contain the op amp ic. General Purpose-type instrumentation amplifiers are used in this application. Instrumentation amplifier is delivered in a Tube case. There is a growing number of terminations approaching the number of 14. A total of 14 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. To be specific, this instrumentation amplifier is a type of Operational Amplifier. In total, the buffer amplifier consists of 14 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 250μV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Operational amplifier can operate supply current at 90μA. 129.54dB should remain the voltage gain. There are 4 channels on the operational amplifiers. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals.
LMC6464BIN/NOPB Features
14 Pins
supply voltage of 5V
129.54dB voltage gain
Output Type: Rail-to-Rail
LMC6464BIN/NOPB Applications
There are a lot of Texas Instruments LMC6464BIN/NOPB Instrumentational OP Amps applications.
- Displayers for aircraft and air transportation control systems
- High input resistance broadband
- Automotive sensors
- Automatic control
- Blood pressure sensors
- Strain gauges
- Test equipment
- Medical imaging
- Instrumentation
- Multimedia playback equipment
