LMC6482AIN/NOPB

2 Channels 30mA per Channel 0.02pA 70 dB Instrumentational OP Amps 0.000004μA 3V~15.5V ±1.5V~7.75V LMC6482 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-LMC6482AIN/NOPB
Package: 8-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 470
Description: 2 Channels 30mA per Channel 0.02pA 70 dB Instrumentational OP Amps 0.000004μA 3V~15.5V ±1.5V~7.75V LMC6482 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Contact Plating	Tin
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Weight	4.535924g
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Number of Functions	2
Supply Voltage	5V
Base Part Number	LMC6482
Pin Count	8
Output Type	Rail-to-Rail
Power Supplies	3/15V
Number of Channels	2
Operating Supply Current	1.3mA
Nominal Supply Current	1.3mA
Output Current	30mA
Max Supply Current	1.4mA
Slew Rate	1.3V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	0.02pA
Voltage - Supply, Single/Dual (±)	3V~15.5V ±1.5V~7.75V
Output Current per Channel	30mA
Input Offset Voltage (Vos)	110μV
Bandwidth	1.5MHz
Unity Gain BW-Nom	1500 kHz
Voltage Gain	116.47dB
Average Bias Current-Max (IIB)	0.000004μA
Power Supply Rejection Ratio (PSRR)	70dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	16V
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.000004μA
Programmable Power	NO
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

LMC6482AIN/NOPB Overview

There is a 8-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. There are two types of operational amplifiers in this circuit. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be at least 8 terminations this year. It consists of a total of 8 pins in total. It is important to remember that this op amp should be operated at a voltage of 5V volts. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are included on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 110μV. For this electronic part, it is recommended that you mount it with type Through Hole. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureUsing an 1.3mA supply current, this operational amplifier ics can be operated. The voltage gain should stay at 116.47dB. There are 2 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages.