LMC6482IM

2 Channels 30mA per Channel 0.02pA 65 dB Instrumentational OP Amps 0.000004μA 3V~15.5V ±1.5V~7.75V LMC6482 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-LMC6482IM
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 687
Description: 2 Channels 30mA per Channel 0.02pA 65 dB Instrumentational OP Amps 0.000004μA 3V~15.5V ±1.5V~7.75V LMC6482 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	235
Number of Functions	2
Supply Voltage	5V
Base Part Number	LMC6482
Pin Count	8
Output Type	Rail-to-Rail
Power Supplies	3/15V
Number of Channels	2
Operating Supply Current	1.3mA
Nominal Supply Current	1.3mA
Output Current	30mA
Slew Rate	1.3V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	65 dB
Current - Input Bias	0.02pA
Voltage - Supply, Single/Dual (±)	3V~15.5V ±1.5V~7.75V
Output Current per Channel	30mA
Input Offset Voltage (Vos)	3mV
Bandwidth	1.5MHz
Unity Gain BW-Nom	1500 kHz
Voltage Gain	116.47dB
Average Bias Current-Max (IIB)	0.000004μA
Power Supply Rejection Ratio (PSRR)	65dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	16V
Voltage - Input Offset	110μV
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.000004μA
Programmable Power	NO
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead
Lifecycle Status	NRND (Last Updated: 1 day ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e0
Part Status	Not For New Designs
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn/Pb)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL

LMC6482IM Overview

Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. This is a General Purpose type op amp. Upon delivery, op amp ic is packaged in a Tube case. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. Please take in mind that op amp should be run at 5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. Linear amplifier includes 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. Surface Mount is the recommended mounting type of operational amplifiers. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. This op amp can operate from a supply current at 1.3mA. It is recommended to keep the voltage gain at 116.47dB at all times. The op amp ic has 2 channels on it. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals.