LMC6482IMX/NOPB

2 Channels 30mA per Channel 0.02pA 65 dB Instrumentational OP Amps 0.000004μA 3V~15.5V ±1.5V~7.75V LMC6482 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-LMC6482IMX/NOPB
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 273
Description: 2 Channels 30mA per Channel 0.02pA 65 dB Instrumentational OP Amps 0.000004μA 3V~15.5V ±1.5V~7.75V LMC6482 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Base Part Number	LMC6482
Pin Count	8
Output Type	Rail-to-Rail
Power Supplies	3/15V
Number of Channels	2
Voltage	16V
Operating Supply Current	1.3mA
Nominal Supply Current	1mA
Output Current	30mA
Slew Rate	1.3V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	65 dB
Current - Input Bias	0.02pA
Voltage - Supply, Single/Dual (±)	3V~15.5V ±1.5V~7.75V
Output Current per Channel	30mA
Input Offset Voltage (Vos)	110μV
Bandwidth	1.5MHz
Unity Gain BW-Nom	1500 kHz
Voltage Gain	116.47dB
Average Bias Current-Max (IIB)	0.000004μA
Power Supply Rejection Ratio (PSRR)	65dB
Low-Offset	NO
Frequency Compensation	YES
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.000004μA
Programmable Power	NO
Max Junction Temperature (Tj)	85°C
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

LMC6482IMX/NOPB Overview

There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. This is a General Purpose type op amp. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. In total, there are 8 pins on this op amp ic. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. Regarding input offset voltage, op amp rates 110μV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. As long as the supply current of the chip does not exceed 1.3mA, this op amp ic can operate. Op amp is a member of the 116.47dB's 116.47dB family. The op amp ic has 2 channels on it. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. A TR-shaped amplifier is used to pack the buffer amps.