LMC6484AIMX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LMC6484 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 3/15V |
| Nominal Supply Current | 2.6mA |
| Output Current | 30mA |
| Slew Rate | 1.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 0.02pA |
| Voltage - Supply, Single/Dual (±) | 3V~15.5V ±1.5V~7.75V |
| Input Offset Voltage (Vos) | 750μV |
| Bandwidth | 1.5MHz |
| Unity Gain BW-Nom | 1500 kHz |
| Voltage Gain | 116.47dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Voltage - Input Offset | 110μV |
| Current - Output / Channel | 30mA |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Number of Amplifiers | 2 |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMC6484AIMX/NOPB Overview
Op amp is packaged in 14-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the General Purpose-type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. In total, there are 14 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 14 pins are included on the operational amplifiers. Regarding input offset voltage, op amp rates 750μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. It is recommended to keep the voltage gain at 116.47dB at all times. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. This linear amplifier has a total of 4 elements. The linear amplifier is packaged by using a TR axis. On the linear amplifier, there are 2 amplifiers.
LMC6484AIMX/NOPB Features
14 Pins
supply voltage of 5V
116.47dB voltage gain
Output Type: Rail-to-Rail
LMC6484AIMX/NOPB Applications
There are a lot of Texas Instruments LMC6484AIMX/NOPB Instrumentational OP Amps applications.
- Integrator circuits
- Polarized electrodes
- Signal operation
- Multimedia playback equipment
- Blood pressure sensors
- Portable media players
- Automotive sensors
- Communication
- Home audio systems
- Signal transformation
