LMC6484AIN/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LMC6484 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/15V |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Nominal Supply Current | 2.6mA |
| Output Current | 30mA |
| Max Supply Current | 2.8mA |
| Slew Rate | 1.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 0.02pA |
| Voltage - Supply, Single/Dual (±) | 3V~15.5V ±1.5V~7.75V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 750μV |
| Bandwidth | 1.5MHz |
| Unity Gain BW-Nom | 1500 kHz |
| Voltage Gain | 116.47dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Voltage - Input Offset | 110μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.000002μA |
| Height | 5.33mm |
| Length | 19.177mm |
| Width | 6.35mm |
| Thickness | 3.429mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMC6484AIN/NOPB Overview
Packaged in a 14-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the General Purpose-type. In the case of Tube cases, linear amplifier will be delivered. The number of terminations approaches 14. Linear amplifier has a total of 14 pins. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 14 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 750μV. For this electrical component, Through Hole is the recommended mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . Voltage gain should remain at 116.47dB. This op amp contains 4 circuits. There are 4 channels on the operational amplifiers. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages.
LMC6484AIN/NOPB Features
14 Pins
supply voltage of 5V
116.47dB voltage gain
Output Type: Rail-to-Rail
LMC6484AIN/NOPB Applications
There are a lot of Texas Instruments LMC6484AIN/NOPB Instrumentational OP Amps applications.
- Professional videography
- Band-stop filter
- Biopotential
- Exponential operation circuits
- Blood pressure sensors
- Video amplifiers
- PDA
- Comparator
- MP3
- Test and measurement instruments
